Fuji Gfx Shutter Count

For cameras released after the Fuji X-T2, you can head to apotelyt.com and drop an unedited, straight-out-of-camera JPEG into the tool to find your camera’s shutter count. However, this also includes images taken with the electronic shutter, which obviously doesn’t cause any wear to the mechanical shutter.

New functions include the improvement of in-body image stabilization performance for X-H1, 4K HDR video recording and simultaneous output of Film Simulation / F-Log footage for X-T3, and 35mm format mode for GFX 50S

We would like to amend some of firmware updates that we announced on November, 13, 2018.

  • Fuji GFX 100 - 1200 shutter count - near mint. Pre-Owned Digital SLR. Or Best Offer +$11.10 shipping. Watch; S p o n s o r e d. Fuji GFX 100 with 50mm lens & 6 batteries - 352 shutter count - near mint. Pre-Owned Digital SLR. Free 2 day shipping Free 2 day shipping.
  • Fuji GFX 100 - 1200 shutter count - near mint. $7,500.00 + shipping. FUJIFILM GFX 100 102MP Medium Format Mirrorless Camera (Body) #71. FUJIFILM GFX 100 W/ TWO EXTRA BATTERIES AND TWO SONY 128gb 300mb/s MEMORY CARDS. $7,100.00 + shipping. FUJI FILM GFX 50S with 63MM 2.8 Lens!

FUJIFILM X-T3 (Ver. 2.00)
Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P. The setting cannot be applied when you select Long GOP with DCI4K/4K or FHD. Please refer to the “Movie Recording Mode” chart below for more details.

SettingSizeMovie
Compression
Frame rateCodec / YUV / Bit depthBit rateShutter Speed
v1.02v2.00
DCI4K 17:9
4K 16:9
4096 x 2160
3840 x 2160
All-Intra29.97p
25.00p
24.00p
23.98p
H.265(HEVC) / 4:2:0 / 10bit
H.264 / 4:2:0 / 8bit
400Mbps1/8000~
1/24 sec. *3
1/8000~
1/4 sec.
Long-GOP59.94p
50.00p
H.265(HEVC) / 4:2:0 / 10bit
H.264 / 4:2:0 / 8bit *1
200Mbps
100Mbps
1/8000~
1/24 sec. *3
29.97p
25.00p
24.00p
23.98p
H.265(HEVC) / 4:2:0 / 10bit
H.264 / 4:2:0 / 8bit
400Mbps
200Mbps
100Mbps
1/8000~
1/24 sec. *3
Uncompressed
(HDMI Output)
59.94p
50.00p
*2 / 4:2:2 / 10bit*21/8000~
1/50 sec. *3
29.97p
25.00p
24.00p
23.98p
*2 / 4:2:2 / 10bit*21/8000~
1/24 秒 *3
1/8000~
1/4 sec.
FHD 17:9
FHD 16:9
2048 x 1080
1920 x 1080
All-Intra59.94p
50.00p
29.97p
25.00p
24.00p
23.98p
H.265(HEVC) / 4:2:0 / 10bit
H.264 / 4:2:0 / 8bit
200Mbps1/8000~
1/4 sec.
Long-GOP59.94p
50.00p
29.97p
25.00p
24.00p
23.98p
H.265(HEVC) / 4:2:0 / 10bit
H.264 / 4:2:0 / 8bit
200Mbps
100Mbps
50Mbps
1/8000~
1/4 sec.
1/8000~
1/24 sec. *3

Uncompressed
(HDMI Output)

59.94p
50.00p
29.97p
25.00p
24.00p
23.98p
*2 / 4:2:2 / 10bit*21/8000~
1/4 sec.
FHD 16:9
High speed Rec.
1920 x 1080Long-GOP120p
(2x/4x/5x)
100p
(2x/4x/5x)
H.265(HEVC) / 4:2:0 / 10bit
H.264 / 4:2:0 / 8bit
200Mbps
(Recording)
1/8000~
1/100 sec. *3
  • *1 Not compatible with DCI4K.
  • *2 Codec and bit rate will be changed depends on the recorder.
  • *3 Cannot choose slower shutter speed than framerate

FUJIFILM X-H1 (Ver. 2.00)
In order for the in-body image stabilization and optical image stabilization to work together when using the XF80mmF2.8 R LM OIS WR Macro, the lens must also have new firmware applied (Ver. 1.11). The new firmware will be released at the same time as the X-H1 firmware version 2.00 (December 2018).

FUJIFILM Corporation (President: Kenji Sukeno) will release new firmware updates for the FUJIFILM GFX 50S (“GFX 50S”), FUJIFILM X-T3 (“X-T3”), and FUJIFILM X-H1 (“X-H1”) X Series digital cameras in November and December.

[ FUJIFILM GFX 50S Ver. 3.30 : November, 29, 2018 ]
Please download from the link below.

  1. Supports “35mm Format Mode” when using GF Lens and H mount adapter
    “35mm Format Mode” crops the center of the sensor 36.0mm x 24.0mm (30.5M) and records JPEG and RAW file.
  2. Improved eye-sensor response
    Reduced the time to switch between EVF and LCD when you select “eye-sensor” on the viewfinder display settings.
  3. Supports simultaneous delete for RAW and JPEG files
    When RAW / JPEG is selected in the card slot setting (for still image), RAW/JPEG image can be deleted simultaneously. By selecting “OFF”, only the RAW image will be deleted.
  4. Supports EVF and LCD color adjustment
    Color of EVF/LCD is adjustable from screen setting menu.

[ FUJIFILM X-T3 Ver. 2.00 : December 2018 ]

  1. 4K HDR video recording in Hybrid Log Gamma (HLG)
    Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards*4 . It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation.
    • *4 Only compatible with H.265(HEVC). Please enjoy with television or display compatible with HLG formats.
  2. Simultaneous output of Film Simulation and F-Log footage*5
    Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor.
    • *5 Not compatible with 59.94P/50P, FHD high speed rec., 4K interframe NR, and HDMI output info display mode.
      Also, cannot choose different image size (4K/FHD) for HDMI output and internal SD card recording.
  3. Recording over 4GB movie file as one file
    Movie files are no longer split when the file reaches 4GB file size. The file is recorded as one file providing an SD memory card greater than 32GB is used (excludes 32GB) *6 .
    • *6 By using SD memory cards less than or equal to 32GB, movie recording will continue without
      interruption when the file size reaches 4GB, however subsequent footage will be recorded to a separate file.
  4. Display color temperature (Kelvin) on EVF/LCD
    Color temperature (Kelvin) can be displayed on EVF/LCD.
  5. Supports slower shutter speeds with DCI4K/4K 29.97P/25P/24P/23.98P *7
    Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P.
    • *7 Cannot select slower shutter speed than framerate with DCI/4K 59.94P/50P or DCI4K/4K/FHD LongGOP recording.
  6. Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264
    Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps.
  7. Display power supply icon
    Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD*8 and Anker PowerCore Speed 20000 PD*9
    • *8 Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
    • *9 Product may not be available on your country.

[ FUJIFILM X-H1 Ver. 2.00 : December 2018 ]

  1. In-body image stabilization and optical image stabilization now work together to improve overall stability
    With an XF or XC optical image stabilized lens, in-body image stabilization worked with 3 axis (up and down / optical axis rotation). The remaining 2 axis (right and left pitch, yaw angle) was controlled by optical image stabilization in the lens. This firmware has a new image stabilization algorithm to allow the in-body image stabilization to work in all 5 axis and to achieve more than five-stops (up to the equivalent of 5.5 stops*10 ) image stabilization by cooperative control according to the types of frequency and blur amount.
    To activate this function, lenses are necessary to be updated to latest firmware version (new firmware version 1.11 only for XF80mmF2.8 R LM OIS WR Macro) . Please check the latest firmware version from the link below.
  • *10 Based on CIPA standards. When using XF10-24mmF4 R OIS, XF18-55mmF2.8-4 R LM OIS, and XC16-50mmF3.5-5.6 OIS II.
Product nameCompatible firmware version
XF80mmF2.8 R LM OIS WR MacroVer. 1.11 or later (will be released on Dec. 2018)
XF200mmF2 R LM OIS WRVer. 1.00 or later
XF10-24mmF4 R OISVer. 1.12 or later
XF18-55mmF2.8-4 R LM OISVer. 3.22 or later
XF18-135mmF3.5-5.6 R LM OIS WRVer. 1.11 or later
XF50-140mmF2.8 R LM OIS WRVer. 1.30 or later
XF55-200mmF3.5-4.8 R LM OISVer. 1.20 or later
XF100-400mmF4.5-5.6 R LM OIS WRVer. 1.20 or later
XC15-45mmF3.5-5.6 OIS PZVer. 1.02 or later
XC16-50mmF3.5-5.6 OIS IIVer. 1.11 or later
XC50-230mmF4.5-6.7 OIS IIVer. 1.10 or later

Fuji Gfx 50

Product nameX-H1 firmware
Ver. 1.12Ver. 2.00
XF80mmF2.8 R LM OIS WR Macro5.0 stops5.0 stops
XF200mmF2 R LM OIS WR5.0 stops5.0 stops
XF10-24mmF4 R OIS3.0 stops5.5 stops
XF18-55mmF2.8-4 R LM OIS3.5 stops5.5 stops
XF18-135mmF3.5-5.6 R LM OIS WR5.0 stops5.0 stops
XF50-140mmF2.8 R LM OIS WR5.0 stops5.0 stops
XF55-200mmF3.5-4.8 R LM OIS5.0 stops5.0 stops
XF100-400mmF4.5-5.6 R LM OIS WR5.0 stops5.0 stops
XC15-45mmF3.5-5.6 OIS PZ3.0 stops5.0 stops
XC16-50mmF3.5-5.6 OIS II *113.0 stops5.5 stops
XC50-230mmF4.5-6.7 OIS II *113.5 stops5.0 stops
  • *11 Not compatible with XC16-50mmF3.5-5.6 OIS and XC50-230mmF4.5-6.7 OIS.

Fuji Gfx Shutter Count Chart

  1. Improved in-body image stabilization performance
    Eliminate image shake when panning slowly when movie recording or on the live view image.
  2. Recording over 4GB movie file as one file
    Movie files are no longer split when the file reaches 4GB file size. The file is recorded as one file providing an SD memory card greater than 32GB is used (excludes 32GB)*12 .
    • *12 By using SD memory cards less than or equal to 32GB, movie recording will continue without
      interruption when the file size reaches 4GB, however subsequent footage will be recorded to a separate file.
  3. Display color temperature (Kelvin) on EVF/LCD
    Color temperature (Kelvin) can be displayed on EVF/LCD.
  4. Display power supply icon
    Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD*13 and Anker PowerCore Speed 20000 PD*14 .
    • *13 Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
    • *14 Product may not be available on your country.

November, 13, 2018

Fuji Gfx 100s

Fuji Gfx Shutter Count

Fujifilm Gfx 50s Shutter Count

Please contact your nearest Fujifilm office.
For information on Fujifilm subsidiaries and distributors, please access the following
http://www.fujifilm.com/worldwide/