Thonny Esp32

Download version 3.3.6 for
Windows • Mac •
For the curious: 3.3.7
NB! On Windows you may receive
a warning dialog from Defender.
Just click 'More info' and
'Run anyway'.
  1. Thonny Esp32 Core
  2. Thonny Esp32 Firmware
  3. Esp32 Micropython Examples
  4. Esp32 Micropython Projects
  5. Thonny Esp32 Wifi

The following files are daily firmware for ESP32-based boards, with separate firmware for boards with and without external SPIRAM. Non-SPIRAM firmware will work on any board, whereas SPIRAM enabled firmware will only work on boards with 4MiB of external pSRAM. Program your board using the esptool.py program, found here. ESP32 ESP32 Table of contents Step 1: Install the USB to UART Bridge VCP Drivers Step 2: Create a Python Conda Environment for ESP32 Step #3: Install the esptool Step 4: Erase the Old Firmware Step 5: Download the New Firmware Step 6: Reflash the new ESP32 Firmware Configure Thonny Set the Serial Port. The ESP32 is a very inexpensive versatile chip designed for efficient Wi-Fi and Bluetooth including BLE. It has a powerful 240MHz dual core microcontroller with 520K of SRAM. It is designed for mobile devices so it has ultra-low power consumption. The ESP32 chip has 32 GPIO pins with support for I 2 C, I 2 S, SPI and UART. In addition it has.

Thonny Esp32 Core

Features

Easy to get started. Thonny comes with Python 3.7 built in, so just one simple installer is needed and you're ready to learn programming. (You can also use a separate Python installation, if necessary.) The initial user interface is stripped of all features that may distract beginners.

No-hassle variables. Once you're done with hello-worlds, select View → Variables and see how your programs and shell commands affect Python variables.

Simple debugger. Just press Ctrl+F5 instead of F5 and you can run your programs step-by-step, no breakpoints needed. Press F6 for a big step and F7 for a small step. Steps follow program structure, not just code lines.

Step through expression evaluation. If you use small steps, then you can even see how Python evaluates your expressions. You can think of this light-blue box as a piece of paper where Python replaces subexpressions with their values, piece-by-piece.

Faithful representation of function calls. Stepping into a function call opens a new window with separate local variables table and code pointer. Good understanding of how function calls work is especially important for understanding recursion.

Highlights syntax errors. Unclosed quotes and parentheses are the most common beginners' syntax errors. Thonny's editor makes these easy to spot.

Explains scopes. Highlighting variable occurrences reminds you that the same name doesn't always mean the same variable and helps spotting typos. Local variables are visually distinguished from globals.

Mode for explaining references. Variables are initially presented according to simplified model (name → value) but you can switch to more realistic model (name → address/id → value).

Code completion. Students can explore APIs with the help of code completion.

Beginner friendly system shell. Select Tools → Open system shell to install extra packages or learn handling Python on command line. PATH and conflicts with other Python interpreters are taken care of by Thonny.

Simple and clean pip GUI. Select Tools → Manage packages for even easier installation of 3rd party packages.

Thonny Esp32 Firmware

Demo

Credits

From 2014 to 2018 the main development of Thonny took place in Institute of Computer Science of University of Tartu, Estonia.

Thonny esp32 firmware


Since September 2018 development of Thonny is partially supported by Cybernetica AS.


Development of several features in Thonny 3.0 and 3.3 was proposed and supported by Raspberry Pi Foundation.

We are also grateful for the help of several contributors from the open-source community around the world.

Esp32 Micropython Examples

Esp32

Instructions & downloads

  • Installation instructions

Latest stable releases are linked in the download box at the top of this page. Older releases and prereleases can be found at https://github.com/thonny/thonny/releases

Plug-ins

Esp32 Micropython Projects

Thonny has simple infrastructure for extensions.

These are some known Thonny plug-ins:

  • thonny-black-format adds a command for formatting current file with Black
  • thonny-ev3dev allows uploading code to EV3 (and much more)
  • thonny-lahendus allows loading exercises from lahendus.ut.ee and submitting solutions for automatic assessment.
  • thonny-edison allows uploading Python code to Edison educational robot
  • thonny-dracula adds Dracula syntax theme.
  • thonny-onedark adds One Dark syntax theme.
  • thonny-crosshair adds commands for invoking CrossHair analyzer.
  • thonny-icontract-hypothesis adds commands for invoking icontract-hypothesis analyzer.
Note that Thonny developers are not responsible for these plug-ins!Thonny esp32 bluetooth

Thonny Esp32 Wifi

Contact & News

Papers